If unreasonable maintenance or cleaning agents are used, it may damage the surface treatment of the wheel hub and damage its aesthetics. High quality wheels require daily maintenance and upkeep. We strongly recommend that you maintain the wheels as follows:
Daily cleaning - The soil on the wheels will cause corrosion after being exposed to damp air for a period of time. The soil on the brakes will affect the braking system and cause corrosion spots on the surface of the wheels. These ash layers and soil must be regularly cleaned. You can pay close attention to this when washing your car.
Using the correct cleaning agent - Maintaining the wheel hub is like maintaining a car. Many household cleaning agents are too strong for the surface of the wheel hub and should be prohibited from use. There are many commonly used cleaning agents in the current market, but many are alkaline or acidic and should be used with caution. You need to use neutral soapy water to rinse. Do not allow any reinforcement agents or tire cleaners to come into contact with the wheels, as this will result in permanent damage to the surface of the wheels.
Do not rinse when the wheels are hot - do not rinse with cold water when the wheels are very hot, and wait for the wheels to cool down before rinsing with soapy water. To prevent scratches on the surface of the wheels, do not use rough towels. If using an automatic cleaner, make sure not to use a steam cleaner or enhancer to clean, otherwise it may cause permanent discoloration or corrosion. Be careful to use a steel velvet or bristle brush to clean the tires, and these abrasive substances should not come into contact with the wheel hub.
Clean the aluminum wheel hub - Coat the aluminum wheel hub with neutral soapy water and dry it with a soft cloth. Polished aluminum wheels require more maintenance and upkeep to maintain their original surface brightness, otherwise the surface will gradually fade. After proper cleaning, corrosion-resistant products should be applied to the surface to maintain its brightness. Electroplated wheels can be cleaned using wheel wax to reduce cleaning times and protect the surface of the wheel hub.